dc.contributor.advisor | Patiño González, Carlos Iván | spa |
dc.contributor.author | Chacón Rangel, Carlos Andrés | spa |
dc.contributor.author | Rueda Gil, Carlos Alberto | spa |
dc.date.accessioned | 2020-06-26T19:45:13Z | |
dc.date.available | 2020-06-26T19:45:13Z | |
dc.date.issued | 2007-10-29 | |
dc.identifier.uri | http://hdl.handle.net/20.500.12749/1535 | |
dc.description.abstract | Los procesos industriales y en general la tecnología, avanzan exponencialmente, razón por la cual es de esperarse que su precisión y exactitud, avancen a la par.
Desde siempre, los sistemas de patronamiento, calibración y caracterización de sensores, han sido problema de entes como la súper intendencia de industria y comercio, y el como hacerlo, es su especialidad. Sin embargo, el no conocimiento de estos procedimientos lleva a las empresas a retrasar su producción debido a fallas de calibración, o incurrir en gastos desmesurados debido a la no puesta a punto a tiempo de sus sistemas de medición.
Con base en lo anteriormente mencionado, se puede evidenciar la necesidad, de conocer y manejar estos procesos, desde la academia, para así poder generar mas soluciones y poder brindar mejores servicios de patronamiento a bajo costo para así poder asegurar que las pequeñas empresas también podrán asegurar la precisión de sus medidas y así garantizar la calidad de sus procesos y productos. | spa |
dc.description.tableofcontents | 1. GENERALIDADES 6
1.1 PLANTEAMIENTO DEL PROBLEMA Y JUSTIFICACION 6
1.2 OBJETIVOS 7
1.2.1 OBJETIVO GENERAL 7
1.2.2 OBJETIVOS ESPECIFICOS 7
1.3 MARCO TEORICO 8
1.3.1 CONTROL ELECTRONICO 8
1.3.2 SISTEMAS TERMALES DE CALIBRACION 40
1.3.3 SENSORES DE TEMPERATURA 42
2. DISEÑO MECATRONICO 49
2.1 DISEÑO MECANICO 50
2.1.1 Planteamiento del problema 50
2.1.2 Planos de Construcción 51
2.1.3 SIMULACION 55
2.2 DISEÑO DEL CONTROLADOR 66
3. RESULTADOS 82
3.1 SISTEMA DE ADQUISCION DE DATOS 82
3.2 SISTEMA FÍSICO 84
3.3 PRUEBAS Y RESULTADOS 87
4. OBSERVACIONES 88
5. CONCLUSIONES 89
BIBLIOGRAFIA 91
ANEXO A REPORTES GENERADOS POR ANSYS
ANEXO B MANUAL DEL USUARIO
ANEXO C RESULTADOS OBTENIDOS | spa |
dc.format.mimetype | application/pdf | spa |
dc.language.iso | spa | spa |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/2.5/co/ | * |
dc.title | Diseño y construcción de un baño automatizado para realizar pruebas y determinar curvas de sensores de temperatura | spa |
dc.title.translated | Design and construction of an automated bath for testing and determining temperature sensor curves | eng |
dc.degree.name | Ingeniero Mecatrónico | spa |
dc.coverage | Bucaramanga (Colombia) | spa |
dc.publisher.grantor | Universidad Autónoma de Bucaramanga UNAB | spa |
dc.rights.local | Abierto (Texto Completo) | spa |
dc.publisher.faculty | Facultad Ingeniería | spa |
dc.publisher.program | Pregrado Ingeniería Mecatrónica | spa |
dc.description.degreelevel | Pregrado | spa |
dc.type.driver | info:eu-repo/semantics/bachelorThesis | |
dc.type.local | Trabajo de Grado | spa |
dc.type.coar | http://purl.org/coar/resource_type/c_7a1f | |
dc.subject.keywords | Automatic control | eng |
dc.subject.keywords | Industrial process control | eng |
dc.subject.keywords | Sensors | eng |
dc.subject.keywords | Electronic control | eng |
dc.subject.keywords | Mechatronic Engineering | eng |
dc.subject.keywords | Investigations | eng |
dc.subject.keywords | Analysis | eng |
dc.subject.keywords | ndustrial processes | eng |
dc.subject.keywords | Calibration | eng |
dc.subject.keywords | Quality standards | eng |
dc.identifier.instname | instname:Universidad Autónoma de Bucaramanga - UNAB | spa |
dc.identifier.reponame | reponame:Repositorio Institucional UNAB | spa |
dc.type.hasversion | info:eu-repo/semantics/acceptedVersion | |
dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
dc.rights.accessrights | http://purl.org/coar/access_right/c_abf2 | spa |
dc.relation.references | Chacón Rangel, Carlos Andrés, Rueda Gil, Carlos Alberto, Patiño González, Carlos Iván (2007). Diseño y construcción de un baño automatizado para realizar pruebas y determinar curvas de sensores de temperatura. Bucaramanga (Santander, Colombia) : Universidad Autónoma de Bucaramanga UNAB | spa |
dc.relation.references | Banks W. and G. Hayward, Fuzzy logic in embedded microcomputers and control systems, Byte Craft Limited, Canada (2001). | spa |
dc.relation.references | Brubaker D.I, “Fuzzy-logic basics: intuitive rules replace complex math” Engineering Design News. | spa |
dc.relation.references | 111-116 (1992). | spa |
dc.relation.references | Cox, E., The Fuzzy Systems Handbook, Academic Press (1994). | spa |
dc.relation.references | Del Brio B. M. y Sanz Molina A., Redes Neuronales y Sistemas Difusos, Alfaomega, Madrid, 244-268 (2002). | spa |
dc.relation.references | Tsoukalas L.H. and Uhrig R.E., “Fuzzy and Neural Approaches in Engineering” John Wiley & Sons, New York, 162 (1997). | spa |
dc.relation.references | Vas, P. Artificial – Intelligence- Based, Electrical Machines and Drives, Oxford, New York 221-227 (1999). | spa |
dc.relation.references | Zadeh, L., “Fuzzy logic” IEEE Computer, 1-83 (1988). | spa |
dc.relation.references | Çengel Y., Boles M., “Termodinamica” McGraw-Hill, Mexico (2003). | spa |
dc.relation.references | Incropera F., DeWitt D., “Fundamentos de Transferencia de calor”, Pearson, Mexico (1999). | spa |
dc.relation.references | Muñoz Moner Antonio F, “Sensorica e Instrumentación de Alta Precisión” | spa |
dc.subject.lemb | Control automático | spa |
dc.subject.lemb | Control de procesos industriales | spa |
dc.subject.lemb | Sensores | spa |
dc.subject.lemb | Control electrónico | spa |
dc.subject.lemb | Ingeniería mecatrónica | spa |
dc.subject.lemb | Investigaciones | spa |
dc.subject.lemb | Análisis | spa |
dc.description.abstractenglish | Industrial processes and technology in general, advance exponentially, which is why it is to be expected that their precision and accuracy will advance at the same time.
Since always, the systems of pattern, calibration and characterization of sensors have been a problem for entities such as the superintendency of industry and commerce, and how to do it is their specialty. However, the lack of knowledge of these procedures leads companies to delay their production due to calibration failures, or to incur inordinate expenses due to the failure to fine-tune their measurement systems on time.
Based on the aforementioned, the need to know and manage these processes can be evidenced, from the academy, in order to generate more solutions and be able to provide better patronage services at low cost in order to ensure that small companies will also be able to ensure the precision of its measurements and thus guarantee the quality of its processes and products. | eng |
dc.subject.proposal | Procesos industriales | spa |
dc.subject.proposal | Calibración | spa |
dc.subject.proposal | Normas de calidad | spa |
dc.type.redcol | http://purl.org/redcol/resource_type/TP | |
dc.rights.creativecommons | Atribución-NoComercial-SinDerivadas 2.5 Colombia | * |
dc.contributor.researchgroup | Grupo de Investigación Control y Mecatrónica - GICYM | spa |
dc.contributor.researchgroup | Grupo de Investigaciones Clínicas | spa |
dc.coverage.campus | UNAB Campus Bucaramanga | spa |
dc.description.learningmodality | Modalidad Presencial | spa |