Mostrar el registro sencillo del ítem
Análisis comparativo de los métodos de medición "in situ" de la eficiencia en motores trifásicos de inducción
dc.contributor.advisor | Acevedo Arenas, César Yobany | |
dc.contributor.author | Flórez Gómez, Iván Darío | spa |
dc.date.accessioned | 2020-06-26T19:39:03Z | |
dc.date.available | 2020-06-26T19:39:03Z | |
dc.date.issued | 2011-05 | |
dc.identifier.uri | http://hdl.handle.net/20.500.12749/1415 | |
dc.description.abstract | Los motores trifásicos de inducción, son actualmente, los más utilizados en el sector industrial, consumiendo aproximadamente unos 2/3 de la energía eléctrica total demanda por este sector; por lo que en las evaluaciones de planta para aumentar la eficiencia de la producción, éstos ocupan un lugar importante. La necesidad de mantener operando los motores en condiciones óptimas de desempeño, implica determinar inicialmente su eficiencia dada por la relación entre la potencia mecánica en el eje y la potencia eléctrica en bornes del motor. Se han desarrollado, dentro del estado del arte, diversos métodos para el establecimiento de esta eficiencia mediante mediciones de laboratorio. No obstante, la necesidad de realizar la medición en el sitio de trabajo implica desacoplar el motor de su carga mecánica e instalar un medidor de par, lo cual afecta las condiciones normales de operación en la empresa por paradas de planta. En este sentido, se han desarrollado pruebas “no invasivas” que a partir de datos eléctricos fácilmente medibles, así como la velocidad de rotación, permiten establecer la potencia en el eje del motor y por ende, su eficiencia. Este proyecto de grado, pretende realizar una evaluación de las técnicas de medición “in situ” de la eficiencia en el motor de inducción trifásico, de manera tal que se pueda realizar un análisis comparativo de dichas técnicas y su aplicabilidad de acuerdo a las circunstancias de medición. | spa |
dc.description.tableofcontents | INTRODUCCIÓN 12 1. CARACTERÍSTICAS OPERATIVAS DE LOS MOTORES TRIFÁSICOS DE INDUCCIÓN 14 1.1. CIRCUITO EQUIVALENTE DE UN MOTOR DE INDUCCIÓN 18 1.1.1 Modelamiento del circuito equivalente. 19 1.1.2. Pruebas para la determinación de los parámetros 23 1.2. CARACTERÍSTICAS PAR-VELOCIDAD DEL MOTOR DE INDUCCIÓN 29 1.3 BALANCE ENERGÉTICO DEL MOTOR 34 2. CARACTERÍSTICAS OPERATIVAS DEL SISTEMA DE BOMBEO CENTRÍFUGO 36 2.1 POTENCIA HIDRÁULICA 36 2.2. BALANCE ENERGÉTICO DEL SISTEMA DE BOMBEO 39 3. MÉTODOS DE EVALUACIÓN DE LA EFICIENCIA 41 3.1. MÉTODO DE LOS DATOS DE PLACA 43 3.2. MÉTODO DEL DESLIZAMIENTO 45 3.3. MÉTODO DE LA CORRIENTE 46 3.4. MÉTODO ESTADÍSTICO 47 3.5. MÉTODO DEL TORQUE EN EL ENTREHIERRO 48 3.6 MÉTODO DEL TORQUE EN EL EJE 49 3.7 MÉTODO DEL CIRCUITO EQUIVALENTE 50 4. MODELAMIENTO DEL SISTEMA EN ESTUDIO 52 4.1 DESCRIPCIÓN DEL SISTEMA 52 6 4.2. DETERMINACIÓN DEL CIRCUITO EQUIVALENTE DEL MOTOR DEL MOTOR DE INDUCCIÓN 56 4.3 CARACTERIZACIÓN DEL SISTEMA DE BOMBEO 67 5. APLICACIÓN DE LOS MÉTODOS 69 5.1 MÉTODO DEL CIRCUITO EQUIVALENTE 70 5.2 MÉTODO DE LOS DATOS DE PLACA 71 5.3 MÉTODO DEL DESLIZAMIENTO 73 5.4 MÉTODO DE LA CORRIENTE 74 5.5 MÉTODO HIDRÁULICO 76 6. ANÁLISIS COMPARATIVO 79 6.1 MÉTODO DE LOS DATOS DE PLACA 79 6.2 MÉTODO DEL DESLIZAMIENTO 81 6.3 MÉTODO DE LAS CORRIENTES 82 6.4 MÉTODO HIDRÁULICO 85 6.5 ANÁLISIS ENTRE TODOS LOS MÉTODOS 87 7. CONCLUSIONES 91 BIBLIOGRAFÍA 95 | |
dc.format.mimetype | application/pdf | spa |
dc.language.iso | spa | spa |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/2.5/co/ | * |
dc.title | Análisis comparativo de los métodos de medición "in situ" de la eficiencia en motores trifásicos de inducción | spa |
dc.title.translated | "Comparative analysis of "in situ" methods of efficiency measurement in three-phase induction motors | eng |
dc.degree.name | Ingeniero en Energía | spa |
dc.coverage | Bucaramanga (Colombia) | spa |
dc.publisher.grantor | Universidad Autónoma de Bucaramanga UNAB | spa |
dc.rights.local | Abierto (Texto Completo) | spa |
dc.publisher.faculty | Facultad Ingeniería | spa |
dc.publisher.program | Pregrado Ingeniería en Energía | spa |
dc.description.degreelevel | Pregrado | spa |
dc.type.driver | info:eu-repo/semantics/bachelorThesis | |
dc.type.local | Trabajo de Grado | spa |
dc.type.coar | http://purl.org/coar/resource_type/c_7a1f | |
dc.subject.keywords | Power engineering | eng |
dc.subject.keywords | Induction electric motors | eng |
dc.subject.keywords | Energy | eng |
dc.subject.keywords | Research | eng |
dc.subject.keywords | Electric machines | |
dc.subject.keywords | Induction motors | |
dc.subject.keywords | Electric power | |
dc.subject.keywords | Electric power | |
dc.subject.keywords | Measurement techniques | |
dc.identifier.instname | instname:Universidad Autónoma de Bucaramanga - UNAB | spa |
dc.identifier.reponame | reponame:Repositorio Institucional UNAB | spa |
dc.type.hasversion | info:eu-repo/semantics/acceptedVersion | |
dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
dc.rights.accessrights | http://purl.org/coar/access_right/c_abf2 | spa |
dc.relation.references | "Flórez Gómez, Iván Darío (2011). Análisis comparativo de los métodos de medición ""in situ"" de la eficiencia en motores trifásicos de inducción. Bucaramanga (Colombia) : Universidad Autónoma de Bucaramanga UNAB" | spa |
dc.relation.references | ÁLVAREZ FERNANDEZ, Noelia. Análisis de diferentes procedimientos y ensayos para la determinación del rendimiento en motores de inducción trifásicos. Universidad Politécnica de Cataluña. Junio 2006. | |
dc.relation.references | ANEXO E. Ensayos para determinar la eficiencia en motores de inducción de corriente alterna. Ministerio de Minas y Energía. República de Colombia. | |
dc.relation.references | Branan, Carl, The Process Engineer’s Pocket Handbook, Gulf Publishing Co. Houston. 1989. | |
dc.relation.references | CALPEDA. Close Coupled Centrifugal Pumps. NM4 60 Hz. 2009 | |
dc.relation.references | CARREÑO PEÑA, Silvia. Estudio de los datos del catálogo en motores de inducción trifásico. Universidad Politécnica de Cataluña. 2009. | |
dc.relation.references | CENGEL, Y. A. Boles, M. A. Termodinámica. Quinta Edición. | |
dc.relation.references | CHAPMAN, Stephen. Máquinas eléctricas. 4 edición. McGraw Hill. | |
dc.relation.references | HSU, John. KUECK, John. OLSZEWSKI, Mitchell. CASADA, Don. OTADUY, Pedro. TOLBERT, Leon. Comparison of induction motor fiel efficiency evaluation methods. IEEE Transactions on industry applications, Vol. 34, No. 1, Enero 1998. | |
dc.relation.references | IEEE Standard Test Code for Resistance Measurement.IEEE Stad 118-1978. | |
dc.relation.references | IEEE Standard Test Procedure for Polyphase Induction Motors and Generators.IEEE Std 112. | |
dc.relation.references | International Standard.Rotating electrical machines – Standard methods for determining losses and efficiency from test (excluding machines for traction vehicles).IEC 60034-2-1. | |
dc.relation.references | MOTOR CHALLENGE.Determining electric motor load and efficiency.Fact Sheet.A program of the U.S. Department of Energy. | |
dc.relation.references | OBREGON LOZANO, Josue Elias. Medición de la eficiencia a motores de inducción utilizando el método del deslizamiento. Universidad Autónoma de Nuevo León. 2005 | |
dc.relation.references | SAADAT, H. Analysis of the equivalent circuit of a Three-phase induction motor. Código MatLab. 2002 | |
dc.relation.references | SALVATORI ARTEZÁN, Marco. Diseño de un control de velocidad para motores de inducción por relación voltaje/frecuencia. Universidad de las Américas Puebla. 2003. | |
dc.contributor.cvlac | Acevedo Arenas, César Yobany [0000376671] | |
dc.contributor.orcid | Acevedo Arenas, César Yobany [0000-0002-5470-181X] | |
dc.contributor.researchgate | Acevedo Arenas, César Yobany [Cesar_Yobany_Acevedo_Arenas] | |
dc.subject.lemb | Ingeniería de energía | spa |
dc.subject.lemb | Motores eléctricos de inducción | spa |
dc.subject.lemb | Energía | spa |
dc.subject.lemb | Investigaciones | spa |
dc.description.abstractenglish | Three-phase induction motors are currently the most widely used in the industrial sector, consuming approximately 2/3 of the total electrical energy demanded by this sector; so in plant evaluations to increase production efficiency, they occupy an important place. The need to keep the motors operating in optimal performance conditions implies initially determining their efficiency given by the relationship between the mechanical power on the shaft and the electrical power on the motor terminals. Various methods have been developed within the state of the art to establish this efficiency by means of laboratory measurements. However, the need to carry out the measurement on the job site implies decoupling the motor from its mechanical load and installing a torque meter, which affects the normal operating conditions in the company due to plant shutdowns. In this sense, “non-invasive” tests have been developed that, based on easily measurable electrical data, as well as the rotation speed, allow to establish the power on the motor shaft and therefore its efficiency. This degree project intends to carry out an evaluation of the techniques of measurement "in situ" of the efficiency in the three-phase induction motor, in such a way that a comparative analysis of said techniques and their applicability can be carried out according to the circumstances of measurement. | eng |
dc.subject.proposal | Máquinas eléctricas | |
dc.subject.proposal | Motores de inducción | |
dc.subject.proposal | Energía eléctrica | |
dc.subject.proposal | Energía eléctrica | |
dc.subject.proposal | Técnicas de medición | |
dc.type.redcol | http://purl.org/redcol/resource_type/TP | |
dc.rights.creativecommons | Atribución-NoComercial-SinDerivadas 2.5 Colombia | * |
dc.contributor.researchgroup | Grupo de Investigación Recursos, Energía, Sostenibilidad - GIRES | spa |
dc.contributor.researchgroup | Grupo de Investigaciones Clínicas | spa |
dc.coverage.campus | UNAB Campus Bucaramanga | spa |
dc.description.learningmodality | Modalidad Presencial | spa |
dc.contributor.linkedin | Acevedo Arenas, César Yobany [césar-yobany-acevedo-arenas-355a062b] |